Dial Indicator Gauge/Laser/SN04 probe mount for the Petsfang on a Tornado/ CR10/ Ender2or3/Michelangelo and more
Description
9.1.2018 For Those Of You Using Any Of My Modular Bases I Have Added A Dial Gauge Mount The Fits The Left Hard Point On The Base. It Is Adjustable By 10Mm So It Should Fit A Lot Of Dial Gauges. It Tucks The Dial Gauge Right Close To The X Rail And Really Works Well. <Img Src="Https://Cdn.Thingiverse.Com/Renders/61/F4/E3/A4/22/8A59C017389814C59F459C70A81Fc929_Preview_Featured.Jpg" Width=300 Height=250> <Img Src="Https://Cdn.Thingiverse.Com/Renders/7E/Da/32/Ee/00/8Ef042C7Bf907C763F0Fdedd87C43A93_Preview_Featured.Jpg" Width=300 Height=250> <Font Size="4" Color=Orange>Works With The New Bullseye </Font> <Img Src="Https://Cdn.Thingiverse.Com/Renders/B0/30/4C/96/84/A4812Dc9C98B62817Dd3Dd2Ef1E53B41_Preview_Featured.Jpg" Width=300 Height=250> <Img Src="Https://Cdn.Thingiverse.Com/Renders/Ca/7C/6A/11/95/89E8D1A9Cc8Cf69D7E5A00B7769E9Eb0_Preview_Featured.Jpg" Width=300 Height=250> ***** 6.20.2018 Added A Mount For The Sn04 Probe With And Without Dial Gauge. Offset = X+36 & Y-48 ****** 6.5.2018 Added Dial Gauge Laser Mount For 40Mm Fan Mount. Still Being Tested. ********* 5.23.2018 Dial Mount For The Petsfang E3D Titan Direct Mod Added ******* ***** Thank You Josh Ferri For Helping Me With All The Measurements And Fitment With This Design. This Is A Dial Indicator Gauge Mount For The Petsfang Duct. It Mounts With 3 X 3Mm X 30Mm Phillips Screws To The Front Of The 40Mm Fan. You Will Need A 1/4" Pin Or Bolt To Temporarily Secure The Dial Gauge While Leveling Your Base And Then Remove The Pin To Take Off The Gauge Once Your Are Satisfied With The Level. This Has The Petsfang Illuminare Shelf On The Bottom If You Want To Mount Led'S. This Fits The Harbor Freight Dial Indicator And Maybe Others. ***** 4/18/2018 Added A Dial Gauge Mount Open In The Center So You Can See The Nozzle With This Mounted. ***** <Img Src="Https://Cdn.Thingiverse.Com/Renders/C1/99/06/B6/2A/71Fcd84Ed7071D02A0750B693257Bf8E_Preview_Featured.Jpg" Width=500 Height=400> ***** ***** I Am Working On One Without The Led Shelf And A Mount For A Laser. Stay Tuned.
Statistics
Likes
225
Downloads
0