PTFE Tube Holder and Guide for Tevo Tarantula and Others

PTFE Tube Holder and Guide for Tevo Tarantula and Others

Description

This Is A Ptfe Tube Holder That Works Perfectly To Keep The Ptfe Tube From Getting Caught Or Binding Up On A Top Mounted Lcd Controller For Your Tevo Tarantula. This Will Probably Work On Other 3D Printers As Well. Specs: Length: 170Mm Depth: 75Mm Thickness: 4Mm Depth From Center Of Mounting Hole To Center Of Ptfe Tube Guide: 55Mm I Designed This Because I Have My Lcd Controller Mounted On Top On My Printer. I Had Several Issues Occurring As The Z Carriage Raised Up, The Ptfe Tube Would Get Caught Under The Lip Of The Lcd Controller And Cause A Malfunction Or Would Bind Up The Extruder. I Mounted This In The Center And Work Extremely Well. Infill And Resolution Are To Your Preferences. There Is No Stress On The Ptfe Holder, It Just Pushes The Tube Forward And Out Of The Way Of Obstructions. It Is Mounted Using A T-Nut On The 2020 Extrusion. This Was Designed In Tinkercad. Please Post Your Comments And Would Like To See If You Make One. It Will Let Me Know If These Mods Or Things I Design/ Re-Design Are Of Use To The Community. Also, Please Check Out My Other Projects.

Statistics

Likes

5

Downloads

0