The ChiDuMo (Chimera Dual Nozzle Montage) for Tronxy X5S

Description

For Demand I Made Changes To My Chichimon To Fit With A Chimera Dual Nozzle. Fan Fangs Are Wider And It Can Be Mounted Without Work On The X-Gantry Of Tronxy X5S Or Similar. The X-Endstop Must Be Changed: Mine Is At The Backside Of The Gantry. Keep That In Mind. Nozzle Will Be Lower Than Original, So Best Use The Bed-Lowering Https://Www.Thingiverse.Com/Thing:2825583 Both Heatblocks Should Jut Out To The Front. Partlist: 1X Chidumo (Printed) 2X M2,5 X 8Mm (10 And 12Mm Should Also Fit) 1X Chimera Dual Nozzle + 30X30 Fan + Stock Screws 1X Bl-Touch (3D-Touch) + Stock Screws 2X 2X 5015 Blower Fan 4X M3 25Mm Screw + Nut The Bl-Touch (Or 3D-Touch) Should Measure 1Mm Below The Nozzle And Can Be Set Down With Spacers. Distance Settings For Probe Measured From The Left Nozzle: X -29 Y -19 Z -1 (Measure By Your Own) I Can Not Test It. So If Something Should Be Changed, Let Me Know. If Installed, Please Post A "Made". Edit: Chimera_Dual_Nozzle_Wider_Fangs.Stl Are A Little Bit Wider(53Mm) And Bowed Outside.

Statistics

Category

Tags