Baby's First Mace - Remake
Description
I Started A Quick Remake Of This Excellent Design By Dutchmogul Only Because Having Facets On A Round Object Is A Pet Peeve Of Mine. Then, I Thought, While I Am At It I Might As Well Make It Print Better Without Supports. So I Made The Head More Tear Drop Shaped. Finally, I Figured That Making It All Screw Together Would End Up More Stable And Strong So I Added Threading. Best To Still Glue It Before Handing It To A Child. Print The Head: Pause At 50Mm Or So To Toss In The Rattle Bits. .2Mm Layer - 0% Infill - 4+ Shells (Thicker = Stronger) - Support Only Under The Center Where It Meets The Handle. Print It Slow With 100% Filament Cooling Fan Or It Will Curl Up While Printing And Cause Problems. I Did It At 50% Of My Normal Printing Speed. Ymmv Pommel: .2Mm Layer - 3-4 Shells Is Fine With 25%+ Infill - Support Only Under The Center Where It Meets The Handle. Handle: .2Mm Layer - 3-4 Shells Is Fine With 25%+ Infill I Bumped The Infill Up On The Pommel And Handle Pieces Because I Expect It To Be Abused.
Statistics
Likes
39
Downloads
0