Odyssey Battery Threaded Post Terminal Cover No Logo - Fits Others
Description
This Is A Terminal Cover Designed To Fit A Marine Battery With A Threaded On Battery Post. In My Case, It Went On An Odyssey Pc-2150T Battery. This Battery Was Going To Be In My Trailer Tongue Box And I Wanted To Have Something In Place That Allowed Me To Connect Multiple Cables To The Post, But Still Cover Everything Up And Provide Some Protection From Short Circuiting Without Using A Big Box. It Is Designed To Slip Over And Get Zip Tied To The Cabling To Hold It In Place. Print 2 Of Them For Extra Protection, One On The Positive Side, One On The Negative. This Will Fit Other Batteries, Marine Or Standard, Though It Is A Bit Taller Because Of The Fact That The Posts Are Threaded Into Studs. If You Want To Use It On A Shorter Battery, You Can Simply Set It Lower Then The Print Bed In Your Slicer And It Will Chop It Down If You Print It With Supports. However, I Recommend Printing It With No Supports And The Flat Side Downward At Full Height. The Uploaded Stl Has No Logo, I Added My Own Logo For My Application But A Clean Copy Model Is In The Files.
Statistics
Likes
1
Downloads
0