Holey_Testy
Description
Need A Simple Calibrator And Tester For Quickly Assessing The Capability Of A New Or Newly Modified/Repaired 3D Printer? Instead Of Several Hours Typical Of Other Complex Testers, This One Provides In About 1 Hour Or Less (Depending On Speed And Layer Thickness) The Following: 1. X, Y, Z Dimensions Check 2. Stringing And Oozing Checks Across 5 Pillars Allowing X, Y And Diagonal X-Y Optimization 3. Overhang Test 4. Bridging Test Across About 5 To 7 Mm At The Edge Of Overhang 5. Structural Quality Assessment For Side Pillars With Cross-Section < 2Mm X 2Mm I Found This To Be A Relatively Quick And Reliable Tester For 0.15 To 0.35 Mm Layers. For Smaller Structures And Higher Accuracy Testing, I Use Another Quick Tester Which Can Be Found Here: Https://Www.Thingiverse.Com/Thing:2871083
Statistics
Likes
7
Downloads
0