Blackbox 3D Printer
Description
Discord: Https://Discord.Gg/5Vvm5R9Csw Assembly Guide: Https://Blackbox.Dozuki.Com/C/Assembly_Guide Resources: Https://Blackbox.Dozuki.Com/C/Community_Resources Shop: Https://Kb-3D.Com/Store/En/ Blackbox Is A High-End Open-Source Multitool Printer Which Is Highly Reliable, Precise Fast And Feature Rich. I Designed The Printer For Daily Model Building, But Also For Further Experiments. Since I Have To Rework Many Models, Which Costs A Lot Of Time And Work, It Is Particularly Important For Me To Be Able To Produce High-Quality Prints. Blackbox Is The Key Element Of A Flexible, Autonomous And Completely Open Source Small Scale Production System I'Ve Been Dreaming About. 40X40 T-Slot Profiles Form The 470X500X550Mm (Hxwxd) Sized Frame. The Large Build Volume Of 300X300Mm Can Be Used With Up To Five Materials. This Is Achieved By Water-Cooled Exchangeable Tool Heads. The Tools Do Not Have Their Own Cooling, Instead They Are Cooled Passively By The Tool Bank Or The X-Axis. While The Tools Are Bowden Driven The X-Axis Carries One Direct Driven Extruder For Flexible Materials. The Z-Axis Is Based On Belts With A 1:10 Pulley Reduction, Compared To Ball Screws A Fast, Precise And Cheap Alternative. To Keep The Print Area Warm And Chill Im Using 3Mm Laser Cut Acrylic Sheets. All Axis Are Based On Linear Rails, The Y-Rail Is Supported By The T-Slot Frame While The X-Axis Is Supported By A Lightweight Carbon Square Rod.
Statistics
Likes
41
Downloads
0