Box for Battery Discharger - Aokoda
Description
The Design Ideia Is From Emeraldmeadows (Https://Www.Thingiverse.Com/Thing:2419239) I Just Made Some Minor Changes To The Concept. The Holes In The Box And Lid Are Tight Enough To Use A Tap. I Use M3 Screws For The Box And M2.5 For Fixing The Ceramic Sockets To The Lid. You Can Also Use Nuts If You Prefer But You Need To Drill Open A Bit The Holes. The Discharger In Question Is This One: Https://Bit.Ly/2Hh1Laa
Statistics
Likes
2
Downloads
0