Samsung S7 QI car holder/charger
Description
This Is A Just-Slide-In-Your-Phone Car Holder/Qi Charger I Made For My Samsung S7 With Thin Protective Cover And Designed For The Connection On The One I Already Had. I Was Getting Tired Of Plugging In My Phone All The Time. There Are Only 3 Parts : The Holder Itself With A Cavity For The Qi Electronics The Qi Charger Electronics (See [Here](Https://Www.Banggood.Com/5V-2A-Micro-Usb-Qi-Standard-Wireless-Phone-Charger-Pcb-Circuit-Board-Diy-Charging-For-Mobile-Phone-P-1219808.Html?Rmmds=Search&Cur_Warehouse=Cn) ) The Connection Plate/Cover For The Electronics Since I Designed This Especially For My Situation (Dimensions Of My Phone/Cover And My Existing Holder), I Share Also The [Link](Https://A360.Co/2Jhb8I9) To The Design For The Case You Might Like To Create Your Own Version. Keep In Mind That - The Walls Between The Spool And The Back Of The Phone Need To Be As Thin As Possibe - Placement Of The Spool Relative To The Phone. Most Of The Time The Receiver In The Phone Is In The Middle Of The Back, But Check This First. This Can Be Done Easily With The Unmounted Electronics. The Blue Leds Light Up When Ok. (No Flickering!) I Printed This In Clear Petg. See Pictures. Print The Holder Vertically And The Backplate Flat On The Bed. Keeps Well In A Hot Car. Last Days It Was Up To 27°C Over Here With Lots Of Sun. No Issues.
Statistics
Likes
6
Downloads
0