modular 100w led "sun blaster" casing
Description
This Project Got Inspired From: Https://Www.Youtube.Com/Watch?V=C--5C3Egv4E You Can See Most Of The Electronics/Optics-Like Materials In The Description Of The Video. The Button Is Like Those- (Suitable For The Shafts In The Holder) Https://Www.Ebay.Com/Itm/5-X-Car-12V-On-Off-Round-Rocker-Boat-Toggle-Switch-Push-Button-Black/372086260952?Epid=860674481&Hash=Item56A211C4D8:G:Uqkaaosw0Thzonjc The Project Designed Using Sketchup. The Parts: ------------- **Generic Slice** - A Base Part Of The Structure. **Front Slice** - Like The Generic, But Also Contains Screw Shafts For The Led & Heat-Sink. **Handler Pole** - A Holder For The Casing **Supporters**: A Supporter/Connector Is Connecting Two Slices (Generic/Front) **12Cm** - A Supporter With 12Cm Length (Slice To Slice, Not From The Pins) **5Cm** - With 5Cm Length The 'W' Letter Is For "With" - With Support For Voltage Booster (Like The One In The Link In The Video). Assembly: -------------- Well, This Is A Modular Design, So Practically You May Assemble It As You Like. **My Assembly;** I Printed: 1 - Front_Slice 2 - Generic Slices 5 - 12Cm Supporters 4 - 5Cm Supporters 1 - 5Cm "W" Supporter 1 - Handler Pole All With 50% Infill I Connected The Supporters In A Pentagon Like Shape, Alternately (See In Pictures). I Connected The 5Cm W Supporter In The Lower-Middle-Back Side For The Voltage Booster. I Used M6X20Mm Screws To Reinforce The Whole Structure. The Holder Connected With 4 Zip-Ties (4.8Mm Width) To Two 5Cm Supporters. You May Print/Alter/Distribute/Ask-Me-A-Question. You May **Not** Sell It Or Do Any Commerce With It. I Do **Not** Take Any Responsibillity For Anything Caused By This Design/Description. Use On Your Own Responsibility. Enjoy!
Statistics
Likes
9
Downloads
0