Short and Long Golf Tees
Description
###Description I Designed These Golf Tees After Common Plastic Tees Found In Stores. These Tees Can Be Printed In Pla Or Abs, But <B>Abs Is Recommended</B> Due To It Being Able To Withstand The Impacts Better And It Has The Ability To Be Acetone Smoothed Afterwards. The Photos Posted Are Of The Short (Par 3) Tees. I Added Named/Initials To Mine, But Those Were Not Included In The Uploaded Stl Files. If You Want To Add Your Own Name, I Have Included The Freecad (Fcstd) Files That Have The Editable Text Included. The Text Is Also Rounded Off For A Better Looking Finish, But Nothing Will Be As Clean As No Text At All. ###Performance The Upright Tees Will Look Better After Printing, But Printing The Tees Without A Base Horizontally (With Supports) Will Produce A Better Performing Tee. Also, Adding A Large Number Of Walls (6-8) Will Produce A Better Performing Tee. After Extensive Testing, Abs Highly Out-Performed Pla Tees. The Long Abs Tees Printed Horizontally Lasted 10+ Drives (On Average) And, If They Broke, It Was Normally Due To Poor Layer Adhesion Mixed In With A Bad Impact. The Short Abs Tees Printed Horizontally Did Not Break At All. The Pla Tees Broke After Only A Few Shots Regardless Of Printing Orientation. <Em><B>Tldr:</B></Em> If You Want A Pretty Tee That Won'T Be Used, Go With Pla. If You Want A Tee That Will Last A Round Or Two, Go With Abs (Printed Horizontally With Supports).
Statistics
Likes
9
Downloads
0