Amax QAV-R 130 motor guard soft mount
Description
Motor Guard / Soft Mount For Amax Mini Baby Qav-R 130Mm Frame (Https://Www.Banggood.Com/A-Max-Mini-Qav-R-130Mm-Wheelbase-2_5Mm-Arm-Carbon-Fiber-Fpv-Racing-Frame-Kit-25G-P-1210853.Html ) Note: Since The Area In Contact With The Print Bed Is Very Small, I Print With A Brim To Increase The Area And Ensure Good 1St Layer Adhesion To The Print Bed. If You Are Using Cura, Select Brim Under Build Plate Adhesion. Also, Use 0.2Mm Or Finer Layer Height. Use 0.3Mm Or Higher For 1St Layer Height To Improve 1St Layer Adhesion.
Statistics
Likes
3
Downloads
0