LCD Holder with Micro SD card tray for i3 Plus
Description
Lcd Holder With Micro Sd Card Tray ------------------------------------------- To Flash The Lcd Firmware To Wanhao Duplicator I3 Plus, One Needs To Disassemble The Front Lcd Assembly And Then Insert The Micro Sd Card. To Avoid All That, Use These Assemblies To Make A Easy To Insert The Micro Sd Card. It Replaces The Metal Box Behind The Lcd. Precaution: Don'T Forget To Tape The Heads Of The M3 Screws To Avoid Any Shorts On The Printed Circuit Board. Also Handle With Care. Flatband Cable Need A 90 Deg Turn Behind The Lcd Module, Be Careful, Space Is Limited. Anywhere If You Feel Sharp Surfaces, Tape Them With An Insulation Tape. You Will Need A Micro Sd (Male) To Micro Sd Female Extension Cable, A Sample Is Shown Below Though A Shorter Cable Will Be Better. Some Options: Copy And Paste On Your Browser, Sometimes Clicking On The Link Does Not Work: 1. Https://Www.Amazon.Com/Extension-Extender-Flexible-Monoprice-Raspberry/Dp/B073Ym5Jp1/Ref=Pd_Lutyp_Simh_1_4?_Encoding=Utf8&Pd_Rd_I=B073Ym5Jp1&Pd_Rd_R=9Mk2S3M7Syf0Rrp9V8Hy&Pd_Rd_W=Fq27U&Pd_Rd_Wg=Xdogp&Psc=1&Refrid=9Mk2S3M7Syf0Rrp9V8Hy 2. Https://Www.Amazon.Com/Gp/Product/B072X27V58/Ref=Oh_Aui_Detailpage_O03_S00?Ie=Utf8&Psc=1
Statistics
Likes
26
Downloads
0