Atari SIO plug 400/800/600xl etc.
Description
This Is A Remix - Slight Modification - Of Norm8332'S Sio Plug. I Scaled It To 95% To Print In Pla And Changed The Fastener To An M3 X 10-Mm Cap Head Screw With No Nut. The First One I Made Failed Because I Wasn'T Careful With Soldering The Wires To The Contacts - I Made The Mistake Of Too Much Wire Length Protruding Under The Spring. The Correct Way Is Shown In The Photographs - No Wire Under The Spring. Seems To Work. I Used 7X20 Gauge Sprinkler System Cable. It Is A Little Stiff, But I Was Too Impatient To Order And Found This At The Local Home Improvement Store.
Statistics
Likes
11
Downloads
0