Raspberry Pi Camera Stand Remix
Description
I Didn'T Have Any Spare Nuts Or Anything That The Original Design Called For, And I Didn'T Have A Need To Rotate It Around Either. As A Result I Altered The Original Design (Found Here: Https://Www.Thingiverse.Com/Thing:274111 ) So I Only Needed To Insert The Camera Holder Into The Base! I Recommended Printing The Base With A Larger Infill To Give It Some Weight. There Are Two Sizes: The Standard / Original Size Of The Front Cover From The Original Design, And Then A Larger, Taller Size That Totals Just Under 5Inches (127Mm). The Larger Size Gives Me The Right Height For My Prusa Mk3. The Lines You See In My Printed Pieces Are From The Tape I Placed On My Printer So The Petg Didn'T Ruin The Steel Sheet. Files Include: Stl For: Base, Original Sized Front Cover Piece, Larger Sized Front Cover Piece, Original Back Cover Blender: Files To Change Size On Anything. Has Base And The Two Altered Front Covers. Edit 4/29: Added A Picture Of How Much The Larger Stand Captures Via The Pi Camera For My Printer. It'S The Perfect Height For Me And Hopefully For You Too!
Statistics
Likes
5
Downloads
0