The Birdie truck-stopper motor mount
Description
Just Another Motor Mount, It Is 9 Mm In Thickness By The Motor Mounting Point And Features A 7Mm Threaded Rod For Added Strength, And A Bumper To Protect The Motor From Hitting The Board. Supports A 235 5M Drive Belt Width 10Mm-15Mm Driven By A 15T 5M Pulley Φ10Mm And A 32T 5M Pulley Φ26Mm Gear On The Wheel. Mades To Be Printed In Abs Or Pla. Required Materials - 7 Mm Threaded Rod - 3Mm Bolt With Matching Washer And Nut Otherwise This Is Like The Original Mount I Remixed. I Am Potentially Still Making Changes, So I Will Upload The 360 File Later, Pm Me If You Want The Source. **Important!** As Of 29/4-2018 I Just Started Field Testing This. If You Print And Mount This, Please Take Regular Breaks On Your First Trips And Check The Mount For Wear/Breakage. **Update 17/6-2018** I Tested This A On A Few Occasions Now And It Seems Adequately Strong. I Dont See Any Rips Or Damage Due To Wear Yet. Please Still Look For Wear Damage At Regular Intervals. This Is Not A 1X1 Replacement For A Proper Aluminum Bracket.
Statistics
Likes
2
Downloads
0