Anet A8 filament set – 75mm diameter spool adapter + 90 degree spool holder bracket + filament guide
Description
Anet A8 Filament Set The Aim Of This Set Is To Allow For A Stable Filament Spool Attachment On Top Of The Anet A8 Frame With The Following Features: - Low Torque On Frame Due To 90 Degrees Bracket Even When Using 3Kg Spools - Multi/Large Size Spools Capable Max. Width 140Mm (Without Spool Adapter), Max Diameter 240Mm, Max Inner Diameter 75Mm - Short 95Mm Version Of The Popular Https://Www.Thingiverse.Com/Thing:2070272 Which Fits Into The Standard Anet A8 Spool Holder - Low Weight Filament Guide With Diagonal Attachment The Set Is Containing: - The 90 Degree Bracket “Anet_A8 Spool Holder Bracket Multisize.Stl” - The 75Mm Diameter Spool Adapter “Bolt.Stl” (Remake Of Https://Www.Thingiverse.Com/Thing:2070272) - The 75Mm Diameter Spool Adapter Nut “Nut.Stl” (Remake Of Https://Www.Thingiverse.Com/Thing:2070272) - The 75Mm Diameter Spool Adapter Short (95Mm Length For Standard 1Kg Spools, Also Fits Into The Standard Spool Holder Delivered With Anet A8) “Bolt_Short_95Mm.Stl” (Remake Of Https://Www.Thingiverse.Com/Thing:2070272) - The 95Mm Length Remake Of Https://Www.Thingiverse.Com/Thing:2070272 “Spulenhalter_Links_Mk2_Short95Mm.Stl” - Multi Filament Guides Mounting On The Horizontal Frame (I Go With The The Upper Out Center And The Lower Longslot) - Low Weight Filament Guide With Diagonal Attachment (Might Interfere With Large Diameter Extruder Buttons, So Better Use The One Mentioned Below) “Anet_A8 Filament Guide Extruder Lowweight.Stl” Required For Assembly: - M3X25 Screw 2 Pcs. To Assemble 90 Degree Bracket - M8X180-200 Tread Rod For 75Mm Diameter Spool Adapter Or Use Of Https://Www.Thingiverse.Com/Thing:2070272 - Ball Bearing 608Zz 2 Pcs. 8Mm (Core) 22Mm (Outer Diameter) 7Mm (Width) For Spool Adapter Bolt And Nut The Set Is Designed To Be Complemented By: - Holder Arm Aneta8_Holder_Rev0.Stl From Https://Www.Thingiverse.Com/Thing:1624641 - Extruder Button Https://Www.Thingiverse.Com/Thing:2427227 I Just Recently Modified One Of My Anet A8 For Bowden And Used A Stepper Motor Mount Attached To The Back Of The Display With Vertical Filament Routing (Https://Www.Thingiverse.Com/Thing:2811282) For This Assembly The Filament Must Be Guided At The Back Of The Display As Well, So I Added The Anet_A8 Spool Holder Bracket 90Degr_Bowdenextender.Stl Which Allows To Move The Spool Further To The Back. I Also Included The Freecad Files If Someone Wants To Edit The Designs. Since This Is My First Contribution To Thingiverse.Com Please Let Me Know If I Need To Change Anything….. Caesar
Statistics
Likes
9
Downloads
0