DanO's BIg O Extruder
Description
This Is A Geared Extruder I Designed To Be Compact. The Gear Ratio Is 1:5.22 Printed With Pla You Will Need 2X 609Zz Bearings 1X 5Mmx70Mm Bolt 8X 3Mm Screws 4X 3Mm Nuts Print With Supports Except For The Large Gear (Causes Binding If Not Cleaned Fully) Assembly 0. If You Are Mounting To A Base Do It Now 1. Press In Bearings 2. Attach Drive Gear To The Motor. Align Gears. 3. Assemble Large Gear Assembly. 4. Add The Motor To The Housing. Do Not Tighten. 5. Align Gears. 6. Secure The Motor 7. Add Direct Drive Extruder Of Your Choice. 8. Have A Beer For A Job Well Done. Please Allow 2-4 Hrs Of Use To Break-In For Smoothe Action. (Realign And Retighten Bolts)
Statistics
Likes
7
Downloads
0