Simple Shelf Bracket
Description
A Really Simple But Strong Shelf Bracket. Dimensions: 90Mm High (Side That Attaches To Wall) 90Mm Deep (Side That Shelf Sits Onto) 20Mm Thick The Two Wall Mount Screw Holes Are 5Mm In Diameter (With A 9Mm Countersunk Entry) And Work Perfectly With The Screws Below. Wall Mount: Designed To Work With 7G 30Mm Or 40Mm Plasterboard Screws Such As: 7G 30Mm - Https://Www.Bunnings.Com.Au/Zenith-7G-X-40Mm-Bugle-Head-Plasterboard-Screws-100-Pack_P2408723 7G 40Mm - Https://Www.Bunnings.Com.Au/Zenith-7G-X-30Mm-Bugle-Head-Plasterboard-Screws-100-Pack_P2408715 I Used Some Decking Timber From The Local Hardware Store (Bunnings In Australia) And That Works Nicely For A Thin Shelf. There Are Two Screw Mount Holes For The Shelf Side. They Are 3.5Mm In Diameter (With A 5Mm Countersunk Entry) And Work Perfectly With The Screws Below. Designed To Work 8G 20Mm Screws To Secure The Timber Shelf Material To The Bracket. Such As: Https://Www.Bunnings.Com.Au/Zenith-8G-X-20Mm-Zinc-Plated-Hinge-Long-Thread-Timber-Screws-100-Pack_P2434037 Print Laying Flat (Use Your Slicer To Rotate The Object So It Is Laying Flat, No Supports Needed)
Statistics
Likes
122
Downloads
0