Turntable - Photography and 3D Scanning
Description
This Is An Inexpensive Turntable For Taking Photos Or Videos Or 3D Scans. If You Use The 200Mm Platform, The Only Thing You Might Have To Buy Is The Turn Table Motor For About $10. If You Want To Use Your Own Platform, Like A Piece Of Wood Cut To Your Specific Size, Then You'Ll Need The 608-Zz Ball Bearings So The Platform Stays Level And Turns Easily. Because The Turn Table Motor Shaft Is Offset, You'Ll Need A Platform That Is As Least 340 Mm In Diameter. I Used The [Qlone App](Https://Www.Qlone.Pro) To Take 3D Scans. They Take About A Minute To Scan The Entire Item. You Do Have To Pay To Export The 3D Scan. You'Ll Need: (Affiliate Links) [Turn Table Motor - 2.5-3Rpm](Https://Www.Amazon.Com/Turntable-Synchronous-Synchron-100-127V-2-5-3Rpm/Dp/B01N03Xtm1/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1525307041&Sr=8-1&Keywords=120+Ac+Motor&Linkcode=Sl1&Tag=Puddpira-20&Linkid=Adc27Aecd0Ef26E078F7Cbb0897F2E3E) $10.99 [608-Zz Ball Bearings](Https://Www.Amazon.Com/Turntable-Synchronous-Synchron-100-127V-2-5-3Rpm/Dp/B01N03Xtm1/Ref=As_Li_Ss_Tl?Ie=Utf8&Qid=1525307041&Sr=8-1&Keywords=120+Ac+Motor&Linkcode=Sl1&Tag=Puddpira-20&Linkid=Adc27Aecd0Ef26E078F7Cbb0897F2E3E) $8 For A 10Pack Switch If You Don'T Hardwire The Electric Motor To The Cord Superglue Or Screws To Attach The Mounts To Your Own Platform Paper Clip Or Someway To Secure The Motor To The Adapter (I'Ve Used A Twist Tie From A Loaf Of Bread) Power Cord *Optional And A Bar Of Soap To Lube The Arms So They'Ll Slide Into Place A Bit Easier The Turn Table Motors Are Not Designed To Operate All The Time. They Do Get Warm If Left On For Extended Periods Of Time. When You Turn Them On/Off The Direction They Turn Changes.
Statistics
Likes
20
Downloads
0