Raspberry Pi 3 layer case
Description
A Laser Cut Case For The **Raspberry Pi 3**, Inspired By [Pibow By Pimoroni](Https://Www.Thingiverse.Com/Thing:33443). Since Newer Versions Of Pibow (For The Newer Raspberry Pis) Were Designed But Never Released, **I'Ve Decided To Make My Own And Release It**. **I'Ve Managed To Reduce The Number Of Layers** (From 10 To 8) **And The Overall Dimensions** (From 99X66X30Mm To 90X62X24Mm), Compared To Pibow. **This Was Achieved By Some Half-Thickness Carves And By Using The Raspberry Pi'S Mounting Holes.** - To Make The Carves, Set Your Laser To Engrave About 1.5Mm (Half Thickness Of The Acrylic). *It May Require Some Testing, But It'S Totally Worth It.* - Using The Raspberry'S Mounting Holes Requires M2.5 Screws, Which May Not Be Very Common. To Overcome This, You May Just Expand The Holes In The Board With A 3Mm Drill And Use Plain M3. The Holes In The Case Will Fit M3 Screws With No Modification. Made From 3Mm (1/8") Acrylic. Two Versions Are Provided: One With The Voronoi On Top, The Other Without It.
Statistics
Likes
46
Downloads
0