3030 Magnetic Latch and Knob for Enclosure Door
Description
A Magnetic Latch And Knob I Made For My Printer Door. The Magnets Are 5Mm Diameter Ball Type And I Use Two Per Latch To Increase The Pull A Bit. The Magnet Contacts With The Screw Head That Mounts The Knob. They Must Be Well Lined Up Which Is Pretty Easy With A Clear Door. Has Enough Pull To Hold The Door Shut But Opens Very Easily. If You Want It To Hold Very Securely Then This Isn'T For You. I Used #4 Sheet Metal Screws With 3Mm Flat Washers To Hold The Knobs. 3Mm Machine Screws Could Also Work. Must Not Be Stainless Of Course.
Statistics
Likes
5
Downloads
0