Filament Inlet Guide
Description
Update: To Include A Plain Version To Fit The Std Plastic Filament Feeder. The Upgrade Filament Feeder I Bought Didn'T Come With An Inlet Adapter But Did Have An M6 Thread. So I Made A Filament Guide With An M6 Thread & Printed It In Taulman 3D Nylon 645 As Nothing Tends To Stick, Not Even To The Bed Most Times! 0.3Mm Nozzle @ 0.1Mm Layer Height, Print Time 23 Mins. @ 20Mm.Sec Max. 35% Infill For Nylon 645 Maybe An Addition To This Is Put A Pipe Cleaner In The Inner Cone To Remove Dust As It Feeds?? My Printers Are I3 Pro B'S.
Statistics
Likes
6
Downloads
0