LiPo Tray
Description
<Strong>This Tray Was Designed To Fit 10 Of My Pulse 4S 1350 Mah Lipo Packs. Make Sure The Slots Will Fit Your Batteries Before Printing! </Strong> A Tray To Hold Your 10 4S Lipo Packs! Designed To Fit In My Lowepro Quadguard Bp X3. The Dividers Are A Bit Thin And Are Designed To Be Slightly Flexible For Batteries That May Not Fit As Well. While It Was Designed For The Non-Hv Variant Of The Pulse 1350 4S, The Hv Variant Should Fit As Well. The Slots Are 33Mm X 36 X 58.5Mm. The Entire Case Is 173Mm X 77Mm X 60Mm.
Statistics
Likes
18
Downloads
0