Improved Full Graphic LCD Case and Dock - RepRap Discount Cradle Mount
Description
I Found Pablogil'S Lcd Controller Case Based On The One By Wersy And Really Liked It, But I Also Wanted To Make Some Changes. My Remix Includes: Recessed Sd Card Slot For Easier Access And Removal. Labels For The Ribbon Cable Connectors. Doesn'T Require Multiple Screw Sizes. Uses Only M3X12 Screws For Assembly. The Lcd Spacers Have Holes That Clear The M3 Screws For Easier Install. Contoured Reset Button For A More Interesting Looking Print. Case Incorporates A Retention Groove That Snaps Into The Dock. Spring Loaded Retention Tabs In The Dock Print As One Piece. The Dock Mounts With M3 Screws Spaced 70Mm Apart. The Dock Holds The Front Of The Lcd Case By The Chamfer, And Is Flush With The Front Of The Case So That You Don'T Need A Recess Or Special Clearance For The Encoder Knob. I Did Not Remix The Encoder Knob. There Are A Lot Of Designs Out There, And Most Lcds Come With One Anyway. Drawn With Designspark Mechanical, Rsdoc Source File Included. I'Ve Got A Few Different Fg Lcd'S On Hand, And They All Measured Just A Little Bit Different, The Sd Card Placement Varies Just A Touch, And Some Have The Dimmer Trim Pot On The Front... So I'Ve Incorporated The Dimensions From A Few Different Sources To Try And Fit A Wider Range Of Displays.
Statistics
Likes
52
Downloads
0