Short Calibration Block for FlashForge Creator Pro
Description
The Video Including The Use Of The Calibration Block Linked From The Design That This Was Remixed From Was Actually For The Dreamer Model. My Creator Pro Didn'T Have Any Screws In The Extruder Assembly That Were Long Enough To Reach The Aluminum Block. I Created This With A Shorter Distance From The Ledges To The Bottom So That The Longest Screws In My Extruder Assembly Would Be Able To Reach The Aluminum Block, Although A Washer Is Probably Still Needed. I Created Bevels For The "Ledges" That Support The Aluminum Block To Remove Overhangs And Thereby Allow The Shape To Be Printed In The Default Orientation Without The Need For Supports. The T Version Continues The Ledges To The Bottom Of The Base And Requires More Material To Print, But It Solves Both The Overhang Of The Ledge And The Need For A Washer. Thanks To Damhestheman For The Original Design.
Statistics
Likes
9
Downloads
0