TronXY X1 Radial Fan Adapter - Nut Slotter Series (NSS)

Description

Adapter For 12V Dc 50Mm Radial Blow Cooling Fan To The Original Tronxy X1 Extruder Fan Case. This Mounts On The Left Side Using The Two Existing Screw Holes On The Original Tronxy X1 Extruder Fan Casing. This Allows The Addition Of A Part Cooler Attached Directly To The Radial Blower Fan, E.G. Semi-Circular Duct Remixed From Lokster'S: Www.Thingiverse.Com/Thing:2895893 Compact Single Duct: Www.Thingiverse.Com/Thing:2895901 This Is The First Of My Nut-Slotter Series (Nss) Of Makes. Features A Specially Designed "Nut-Slotter" On Each Mounting Arm To Hold M3 Nuts Used To Secure The Fan. The M3 Nuts Stay In The Slot And Can Slide Up Or Down For Finer Adjustments Of Blower Height So That You Can Aim Nearer The Print Without Cooling The Nozzle Too Much. Quite Happy With How Well The "Nut-Slotter" Works. No More Messing Around With Nuts Dropping All Over When Trying To Reposition/Adjust The Blower Height Or Change A Blower. Hope You Like It And Feel Free To Reuse The "Nut-Slotter" Design In Other Makes. I Hope Such Helper Designs Could Become More Ubiquitous Just Like The Concept Of Countersinking In Subtractive Manufacturing. And Remember, You Can Help By Tipping! Note: You Only Need 2 Diagonal Arms For The Mounting The Standard 50Mm Radial Blower. I'Ve On Purpose Designed This To Be Symmetrical, In Case For Some Reason You Might Want To Mount The Fan Differently. Hence, There Are 2 Extra Arms.

Statistics

Category

Tags