Clueboard 660 66% Mechanical Keyboard
Description
###See Updated Version Of This Case Here: Https://Www.Thingiverse.Com/Thing:3010436 --- Printable [Clueboard 66%](Https://Clueboard.Co/) Keyboard. In My Build, I Use A Teensy 2.0++ With [Qmk Firmware](Https://Github.Com/Qmk/Qmk_Firmware) But Any Qmk Compatible Board Should Work. You May Need To Edit [Rules.Mk](Https://Github.Com/Qmk/Qmk_Firmware/Blob/Master/Keyboards/Clueboard/66/Rules.Mk) If You'Re Not Using A Teensy 2.0. For Hand Wiring, Please Read The Clueboard Source Files For Col/Row/Pin Configurations. Use A Micro Usb Pcb As Pictured. Mine Is Wired For [Rev3](Https://Github.Com/Qmk/Qmk_Firmware/Tree/Master/Keyboards/Clueboard/66/Rev3). - [Layout](Https://Github.Com/Qmk/Qmk_Firmware/Blob/Master/Keyboards/Clueboard/66/Rev3/Rev3.H) - [Pins](Https://Github.Com/Qmk/Qmk_Firmware/Blob/Master/Keyboards/Clueboard/66/Rev3/Config.H) ####Required Parts - Controller E.G. Teensy - 66 * Diodes (I Used 1N4148) - 66 * Switches (Cherry Mx Or Equivalent) - 4 * 2U Cherry Stabiliser - 1 * 6.25U Cherry Stabiliser - [Keycaps](Http://Www.Keyboard-Layout-Editor.Com/#/Gists/63D790Fc19651B91Dd7934D315A4Ea76) (You'Ll Need 2X 2.25U Shift Caps As L And R Shifts Are Same Size) - 1 * Micro Usb Breakout Pcb - 6 * 16Mm M3 Bolt And Nut - 6 * 20Mm M3 Bolt And Nut (Although 16Mm Should Be Ok For These Too) - Wire And Solder - Sticky Rubber Feet (Optional)
Statistics
Likes
149
Downloads
0