Adjustable shower head bracket
Description
I Have Finished Printing The Model And Installed, But I Had To Change The Lever_Skrew. Now Everything Fits Great. My Bracket From The Shower Is Broken ... Such A Crap. So Get To Cad And Rebuild. The Result Is Quite Successful And That'S Why I Share It With You. You Can Print All Chrome Parts With Pla / Petg / Abs, But The Black Part Must Be Made Of Tpu / Flex Filament. The Best Is Tpu With The Hardness 95A. In Addition, You Need A Screw Which Is 20Mm Long And Between 4 Or 5 Mm Thick. The Hole For The Screw Is In The Cad Model 3Mm Large So That The Screw Fits Tightly. On Picture 3, I Have Drawn The Most Important Dimensions, If You Want To Print It, Make Sure That Your Shower Head And The Rod Fits To The Cad Modell. My Rod Has A Circumference Of 70Mm, Because Of The Rubber Part, It Could Also Be Slightly Smaller Or Slightly Thicker. The Shower Head Holder Has A Diameter Of 25 Mm The Middle Part, Without Gum Is 29 Mm The Black Rubber Part Is 23.5 Mm The Screw For Head Holder 20Mmx4Mm I Hope You Like It And You Seaching For This Part, Have Fun.
Statistics
Likes
14
Downloads
0