JGAurora Reel Modification (Extender)

Description

So I Didn'T Want To Replace A Steel Support Part With A Printed Plastic Part So Decided On Designing A Little Mod To The Existing Reel. This Allows For Full Size Reels All The Way Down To Small Ones. It Uses 3 Ridges To Contact The Metal And Uses One As A Stop As Not To Slide Off. If The Size Is Not Quite Right For Anyone Using This Let Me Know And Will Alter It. No Base Or Supports Required In Printing, I Used A 30% Fill And 0.2 Layer Height

Statistics

Category

Tags