Pi Case Stand
Description
Bracket And Legs For The Pi Case Made By Luc_E (This One: Https://Www.Thingiverse.Com/Thing:1585924) I Made The Legs In The Form Of The Point Of Origin Symbol For Earth From Stargate Sg1. You'Ll Need To Print 2 Brackets And 2 Legs. This Adds About 3Mm To The Thickness Of The Back So You'Ll Also Need Screws That Are ~3Mm Longer. The M3 X8 Screws Might Make It, But M3X10 Would Probably Be Better. I Recommend Printing In Abs Or Petg. Pla Is A Bit Too Stiff For The Snaps To Slide In Without Breaking. Edit: Changed The Display Bracket Because Holes Didn'T Line Up With Short Side Of Case And Supports Blocked Usb & Ethernet Ports.
Statistics
Likes
5
Downloads
0