ESC protector (fit's Tekko32 35A ESC)

Description

I Was Damaging The Caps On My Esc Just A Little To Much But Couldn'T Find A Esc Protector That Fits The Tekko32 35A Esc From Holybro Very Well On My Realacc X5R Frame So I Made These Simple Protectors. These Protectors Don'T Have A Bottom So They'Re Easy To Replace. Just Slide Them Over The Esc And The Arm Of Your Frame And Zip Tie Them. Under The Esc I Always Use Some Foam You Get With Orders From For Example Banggood And Tape That To The Arms With Electrical Tape And Put The Esc On. Also I Put Some Heatshrink Around The Esc For Some Extra Protection. I'Ve Printed The Protectos With Pla But I Guess Other Materials Are Probably Better But I Only Have Pla At The Moment. I Print The Protectors Vertacly So No Supports Are Needed. Wall Thickness On The Sides Is 2Mm And On Top It'S 2.5Mm. The Zip Tie Cut Outs Are 4.5Mm Wide And 1Mm Deep So You Can Use Strong Zip Ties. The Inner Width Is 20Mm And Hight Is 8.5Mm. The Length Of The Protector Is 40Mm. If You Like This Thing Please Consider Clicking One Of The Affliate Links Below To Support Me. Realacc X5R Frame: Http://Bit.Ly/2Tmzatw Holybro Tekko32 35A: Http://Bit.Ly/2Kcrhjt Edit: I'Ve Also Printed Them With Petg But Didn'T Test It In The Field Yet. Although They Do Feel A Lot Stronger With Petg. This Could Also Be Because I Use A 0.6 Nozzle With 0.4 Layer Height These Days.

Statistics

Category

Tags