Pinecone decor lamp
Description
This Is A Ceiling Lamp Which Consists Of 53 Different Parts Which Are Organized As Plug-In System. The Assembled Lamp Has A Total Height Of ~37Cm And A Maximum Diameter Of ~60Cm. The Total Weight (Printed With Gold Pla And The Settings Described Below) Is Just Below 1Kg. Top-Down The Angle Of Each Segment Level Increases As Follows: 10°, 20°, 40°, 55°, 70° All Plugs Have 0.2Mm Tolerance For A Better Fitting. This Is The Perfect Amount For My Printer, But Take Care Since The Parts With 55° And 70° Overhangs Can Get A Bit Fragile. All Parts Of The Inner Structure Are 2Mm Thick While The Outer Segments Are 1Mm Thick. Variations ======= Its Overall Shape Is Somewhat Similar To A Pinecone. An Additional Decor Increases The Amount Of Emitted Light And Creates Intresting Shadow Patterns. To Match Your Personal Flavor (And Your Printers Capabilities), I Added Three Different Versions Of Each Segment: - Full Solid - Overhangpart Solid (On The Photos) - Full Decor Print Instructions ============= In Total You Have To Print 53 Parts For The Lamp. Each Inner Ring (Innerring*.Stl) Needs To Be Printed Once, All Other Files 8 Times. *Since I Am A Little Bit Lazy, You Have To Rotate The Parts To Lay Flat On Your Printbed* Additional Information ================= I Couldn'T Provide Pictures Of The Lamp In Function Since I Have No Matching Bulb At The Moment. **Please See Print Settings For Some Hints Which Helped Me Printing The Lamp.** *Assembly Instructions Can Be Found In Post-Printing Section* In Case You Want To Support My Work, Feel Free To Visit My [Patreon](Https://Www.Patreon.Com/Nazrim).
Statistics
Likes
83
Downloads
0