Enclosure for the SBT11(A) based geiger counter from impexeris

Description

This Is A Modified Sbt11 / Sbt11A Geiger Counter Enclosure For The Kit Sold By Impexeris. Its Based On Https://Www.Thingiverse.Com/Thing:2541156 By Glassy. This Differs From The Parent Version By Glassy By * Leaving More Space For The Sbt11 Tube (Mine Just Did Not Fit In What My Printer Produced, So I Made The Space A Tiny Bit Bigger In All Directions) * Slightly Changed The Design So It Prints Without Supports And Has No Large Overhangs Which Printed But Did Not Really Look Good. Its A Bit More Looking Like A Block As A Result. * Changed The Hole For The On/Off Switch As I Had Nothing That Fitted Laying Around. * Added An Additional Groove In Front Of The Tube To Slide In A Piece Of Paper Or Aluminum To Shield Alpha / Beta The Battery Cover Is Unchanged Relative To The Parent Design. The Screw Holes Are The Same As The Parent Design. 2 M3X16 Or M3X18 Screws/Bolts Fit In The 2 Holes At The Front. For The Other 2 Holes I Used M2 Screws Which I Cut And Filed Until They Where Not Too Long.

Statistics

Category

Tags