Ebike servo tester throttle
Description
Potentiometer Throttle To Use With Servo Tester. I Designed This Throttle For My Custom Ebike, I'M Using Helicopter Esc (Speed Controller) And I Needed Some Easy Way To Control It. It Will Work With Any Car, Boat, Plane Esc. Easy Way To Control Brushless Motor Is To Connect Its 3 Signal Wires To Servo Tester. Just Remove Potentiometer From Servo Tester And Attach New One (20Kpot) With Extension Cable. Parts: 20Kohm Potentiometer Gt2 180 Belt 2X M3X35Mm Screw 4X Mini M3 Bearings 1X 688Zz Bearing 2X Spring Cheap Servo Tester : Https://Www.Ebay.Co.Uk/Itm/Multi-Rc-Digital-Esc-Servo-Tester-3Ch-Ecs-Consistency-Speed-Controler-Power-Gw/292314083669?Epid=27008389654&Hash=Item440F46F155:G:Xxuaaoswttvzisew You Need To Glue Potentiometer To Potentiometer Pulley, I Used Gorilla Glue. When Assembling: First Mount Belt On The Pulleys, After That Install Bearings. Make Sure You Leave Little Bit Of Slack On Potentiometer, When You Release Springs They May Damage Potentiometer If Spring Hit Its Limit Too Hard, Just Leave A Bit Of Turn Left When Spring Is Fully Compressed. Then All You Have To Do Is To Calibrate Throttle Range On U Your Esc. Https://Youtu.Be/Rzk90Lfxrpq
Statistics
Likes
21
Downloads
0