MeArm Redesign
Description
This Is A 3D Printer Friendly Version Of The Mearm. Please Note That This Is A Finished Product But Not Tested. The Features Are Mostly The Same As The Standard Mearm, But The Servo Mounts Have Been Changed Significantly; The Upper Arm Support And Main Arm Support Have Been Fused For Ease Of Assembly As Well. This Is Simply A Remix Meant To Keep The Functionality Of The Standard, But Ease The Printing Process And Assembly. Credit: Mearm Limited Uk For Original Design. You Can Find The Instructions For The Assembly At: Http://Www.Instructables.Com/Id/Pocket-Sized-Robot-Arm-Mearm-V04/ Please Note: -The Servo Mounts Allow The Servo To Be Slid Into The Housing Unit And Claw Unit. - A Track Was Added To The Bottom Of The Housing Unit And Servo Arm Bottom For Bearing System. This Was Added For Stability And Less Friction. - A 2.3M Tap Is Needed And A 2Mm Allen Wrench. (6) 2.3Mm X 11Mm Screws Are Needed To Mount The Servos. The Back Holes Of The Servo Mounts Will Need To Be Tapped Before Inserting Screws. (30+) 4.5Mm Diameter Copper Bbs Are Needed For Bearing.
Statistics
Likes
8
Downloads
0