1L Bottle Holder (Brine Shrimp Hatchery)

Description

Holds A 1L Bottle Upside Down, Primarily For The Purposes Of A Brine Shrimp Hatchery. Perfect For Breeder Aquariums And For Raising Fry. For This Purpose You'Ll Also Need A "Co2 Bottle Cap" For 1L/2L Bottles - You Can Get These For <$1/Ea. On Ebay If You Don'T Mind The Wait. Designed Specifically Around A 1L Coke Bottle, But I Suspect Most Brands Should Fit Fine. The Top Hole Is 90Mm So There Is A Little Bit Of Play Allowed. The Pegs Are 7.75Mm Wide And The Holes For Them At 8Mm Wide. This Offered A Perfect Press Fit For Me, But I'M Actually Overextruding A Bit Right Now So I Have Provided The Fusion 360 File If Someone Needs It To Tighten Those Tolerances. For Proper Assembly, You Will Need: - Printed Parts - (1) 1Xmiddle.Stl - This Is The Piece The Neck Of The Bottle Rests On - (2) 2Xtopbottom.Stl - This Piece Is Repurposed As Both The Top And The Bottom - (4) 4Xarmlong.Stl - These Arms Go Between The Top And The Middle - (4) 4Xarmshort.Stl - These Arms Go Between The Middle And The Bottom - (1) [Co2 Bottle Cap For 1L/2L Bottles](Http://A.Co/1Ucramg) - Airline Tubing - (1) Short Piece, Approx 6" Or As Desired - (1) Long Piece, Approx 18" Or As Desired - (1) [Microball Valve](Http://A.Co/5Ye4Mhd) Thekingofdiy Has A Great Video On Setting Up And Using Your Brine Shrimp Hatchery [Here](Https://Www.Youtube.Com/Watch?V=G2Bkvhfgpvu). I Intend To Attach More Pictures Of The Assembled Hatchery Later :P.

Statistics

Category

Tags