Creality Cr-10 Flexion hotend direct mount
Description
***Recently Updated 04/06/2018*** I Made This Thing Because There Was Nothing Readily Available For A Direct Mount To The Cr-10. All You Need Is Stock Screws For Direct Mount To X Axis, Standard Front Facing Fan Screws, The Screws Provided With The Flexion Hotend Heat Sync And Some Turbo Fans Which Can Be Found Cheap On Ebay Or Other Online Sources. I Prefer To Make Designs With Minimal Outsourced Parts, Buy Your Flexion Hotend And Turbo Fans Then Your Good To Mount Up To Cr-10, I Have Managed To Successfully Print Many Fine Objects With This Design, Please Ensure Bed Is Level To A 0.4 Feeler Gauge And That Flexion Hot End, Heat Sync And Nozzle Are Perfectly Aligned To Reduce The Chance Of Clogging. This Is Only Issue I Have Stumbled Across Where The Bowden Tube Is Getting Pulled Back Upon Retraction Then Causing A Clog. To Reduce This Effect I Have Attached A Bowden Connector At The Top Of The Print And Also Printed Some Bowden Connector Clips/Locks To Ensure There Is No Room For The Bowden Tube To Lift Upon Retraction. Some May Not Have This Issue Due To Alternative Slicer Settings. ***Another Model Is Yet To Come Where The Extruder Will Be Mounted On The X Axis Directly Into The Hotend***. Happy Printing!
Statistics
Likes
9
Downloads
0