Case for TinyFab Heatbed Driver Board for Cetus3D
Description
This Is A Case For The Driver Which Belongs To The Heatbed Controller Produced By Tinyfab For The Cetus3D. Find The Stl And My Freecad Source File Attached. The Mounting Is Still Missing But In Progress... Easiest Way To Print Use Pla 20 Or 60% Infill And Supports. For Mounting The Board Use Stock Personal Computer Screws In M3 Size (Max. 7Mm Thread Length) You Can Use The Driver Case With The Stock Metal Base Case From Tiertime Or With The Tinyfab Case Shown On My Photos Changelog: 2018-05-12 V1 Case Only Without Mounting Holes 2018-05-13 V2 Case With Mounting Holes In The Baseplate For Attaching At The Cetus3D Printer Aluminium Frame; Plus Additional T-Nut Which Is Needed To Fix The Case To The Frame. Also Use Small M3X6 Or M3X8Mm Personal Computer Screws For The T-Nuts.
Statistics
Likes
5
Downloads
0