Anycubic Kossel Plus touch panel mount with USB port
Description
For This Mount, You Will Need A 3.5 Inch Raspberry Pi Touch Panel. I Used This One: Https://Www.Amazon.Com/Gp/Product/B01Cnjvg8K/ But The Adafruit One Should Work Just As Well. You Also Need A Usb Connector Like This One: Https://Www.Amazon.Com/Cable-Leader-Panel-Mount-Type-Female/Dp/B00Uglofr2/. You Can Print This With Any Material You Want. Abs Will Shrink Just Enough For This To Be A Friction Fit. I Used Petg, So A Few Spots Of Epoxy Held The Panel In Just Fine. The Raspberry Pi Is Not Mounted In The Box But Is Instead Under The Heated Bed With Another Mount I Created. Use Either Https://Www.Thingiverse.Com/Thing:2879343. Or Https://Www.Thingiverse.Com/Thing:2917902. You Will Need To Connect The Display To The Pi Using A Gpio Extension Cable, Like This One: Https://Www.Amazon.Com/Miuzei-Female-Ribbon-Compatible-Raspberry/Dp/B071Gtjf7N. Rather Than Using Touchui, I Recommend Setting Up Octoprint With Octoprint-Tft: Https://Github.Com/Mcuadros/Octoprint-Tft. It'S Much More Responsive Than Touchui And Less Resource Intensive. Edit: V1.1 Uploaded. I Discovered A Fitment Issue Right After I Uploaded This Where The Ribbon Cable Connector Got In The Way Of Mounting. V1.1 Makes The Box 7Mm Deeper, Which Should Resolve The Issue.
Statistics
Likes
65
Downloads
0