S800 Skyshadow FPV Camera Pod for GoPro Session, Runcam & Foxeer Cameras
Description
<B>Update: Version 3 Now Available<B> <P>This Camera Pod Replaces The Whole Front Of The S800 And Will Hold A Gopro Session 4 Or 5 And Your Fpv Camera. The Width Of The Pod Matches The Stock Camera Bay And Has A Profile That Matches The S800 Nose. Cut The Foam Front Out Of The S800 And Glue This In With A Strong, Flexible Adhesive Like E6000 Or Goop. There'S A Cavity On The Underside Of The Pod To Hold Adhesive Tyre Balancing Weights If Needed For Setting The Correct Cg.</P> <P>Currently Supported Fpv Cameras:</P> <Ul> <Li>Runcam Swift 2</Li> <Li>Runcam Micro Swift</Li> <Li>Foxeer Mini Arrow V3</Li> <Li>Runcam Eagle 2</Li> </Ul> <P>Future Versions Will Include The Runcam Eagle 2 And The Runcam Swift Mini. </P> <P>The Fpv Camera Is Friction Fit And Should Be Secure. If Extra Peace Of Mind Is Needed, You Can Use A Blob Of Hotglue To Seal The Camera In Place. If The Fit Is Too Tight, Use A Sharp Craft Knife To Remove Material. Likewise, If There Is A Little Play, Cut A Piece Of Paper Or Card To Use As A Shim.</P> <P>I'M Always Happy To Hear Your Thoughts, So Let Me Know In The Comments How You Get On With This And Suggest Any Improvements That You Think Need Making.</P> <P>If You'Ve Printed This Camera Pod And Like It, Why Not Head Over To The <A Href="Https://Www.Facebook.Com/Groups/597978497053499/">S800 Facebook Group</A> And Post A Photo Or Video Of Your S800 Using It?</P> <P>Why Not Also Head Over To My <A Href="Https://Www.Youtube.Com/Channel/Uctzcj5Cizvhl27Idly0Rbow">Youtube Channel</A> And Watch Me Crash?</P> <P>I Also Have A <A Href="Https://Www.Facebook.Com/Loflyfpv/">Facebook Page</A>.</P>
Statistics
Likes
83
Downloads
0