Simchair MKIII cyclic gimbal v2 I2C
Description
----------------------------------------- Important! Please Use Latest Files From Github: Https://Github.Com/Hc625Ma/Simchair_Models/Tree/Master/Components/Peripherals/Flight%20Stick%20Gimbal Visit Http://Hc625Ma.Org For Latest News And Manuals! While This Gimbal Is Perfectly Fine If You Don'T Need Stick Centering, I Strongly Suggest Using This Version Instead, With Springs And The Corresponding Force Trim Mode: Http://Hc625Ma.Org/Flight-Stick-Gimbal-608Zz-Reinforced/ ------------------------------------------- This Is An Improved Cyclic Gimbal For The Simchair Mkiii. It Is Quite Similar To V1 (Https://Www.Thingiverse.Com/Thing:2795753) Except For Added Mechanical Calibration Capability And Completely Changed Electronics. It Uses An Ads1115 16-Bit Adc For Its Axes And Connects To A New Arduino Leonardo Powered Master Controller Through I2C. Of Course, It Can Still Be Used With An Unojoy Based Controller, But I Recommend Switching To A Leo Powered One (Will Be Released Soon). B8 Stick That Was A Part Of The V1 Package Is Now Fully Functional And Has Moved To A Separate Package (Https://Www.Thingiverse.Com/Thing:2918906) Ikea Gunde Chair (Optional): Http://Www.Ikea.Com/Us/En/Catalog/Products/00217797/ Simchair Ikea Gunde Frame (Optional): Https://Www.Thingiverse.Com/Thing:2795691 2 X Ss495A Hall Sensor 2 X 6X6X4Mm Square Magnet 4 X 3X12Mm Screws And Nyloc Nuts To Connect The Frame To Its Enclosure 2 X 3X25Mm Screw For Lever Connector Axis Strengthening 2 X 3X20 M3 Screws For Magnet Holders 4 X M8X85 Bolts, Spring Washers, And Nuts 4 X 608 Bearings (Standard Skateboard Bearings) Cyanoacrylate To Glue Ss495A'S And Their Wires To Their Mounting Spots 1 X Simchair Mkiii I2C Controller (Https://Www.Thingiverse.Com/Thing:2919692) 1 X Ads1115 16 Bit Adc Check Out An Assembly Manual At Http://Hc625Ma.Org/Cyclic-Gimbal/ , More Interesting Stuff To Come!
Statistics
Likes
29
Downloads
0