Simchair MKIII I2C B8 flight stick
Description
----------------------------------------- Important! Please Use Latest Files From Github: Https://Github.Com/Hc625Ma/Simchair_Models/Tree/Master/Components/Peripherals/B8%20Flight%20Stick Stick Frame: Https://Github.Com/Hc625Ma/Simchair_Models/Tree/Master/Components/Frames/Ikea%20Gunde%20Frame/Cyclic%20Stick%20Frame%20Parts Visit Http://Hc625Ma.Org For Latest News And Manuals! ------------------------------------------- This Is A Fully Operational Simchair Mkiii Compatible Remix Of A Very Nice B8 Flight Stick Replica, Originally By Schrodingers_Cat. It Is Designed For Use With A New I2C Controller(Https://Www.Thingiverse.Com/Thing:2919692). It Contains An Arduino Pro Micro Inside (Sketch Included). The Trigger Has 2 Positions: Half-Press (Intercom) And Full-Press With A Click (Radio Push To Talk). When The Trigger Is Fully Pressed, A Half-Press Button Is Disabled By The Software, So Your Sim Will See These Two Positions As Completely Separate Buttons. You Will Need: 1 X Arduino Pro Mini Board 1 X Ky-023 Joystick Module 1 X Usbtocom Adapter (E.G. Pl2303) Or Another Arduino To Program It 3 X Pbs-11B Buttons 1 X Pbs-10B-2 Button (Trigger Intercom) 1 X 12X12X4.3Mm Ts-1202 Button (Https://Goo.Gl/Mjpt6T) (Trigger Ptt) Some Wires 1 X M8 X 75 Bolt And Nut 1M Of Utp-5E Cable 1M Of 10Mm Aluminum Square Pipe 6 X M3X20 Screws And Nuts 1 X M3X40 Screw For Trigger Mounting 1 X Simchair Mkiii I2C Controller (Arduino Leonardo Based) (Https://Www.Thingiverse.Com/Thing:2919692) 1 X Simchair Mkiii Cyclic Gimbal V2 (Https://Www.Thingiverse.Com/Thing:2917209) Ptt Ts-1202 Button Is Glued With Superglue To The Left Half Part Just Under The Pbs-10B2 Tip, Which Goes Into The Trigger. Adjust Stick Height To Your Liking, Cut The Aluminum Pipe Accordingly, Then Route An Ethernet Cable Through The Pipe And Crimp It As A Usual Ethernet Cable.
Statistics
Likes
97
Downloads
0