E3D Titan + V6 mount for Printrbot Simple Metal
Description
This Project Is Being Uploaded A Bit Prematurely Because I'M Impatient, I'Ll Write Up A Bit Of An Install Guide With Updated Photos And Parts List Soon. The Printrbot Simple Metal Is A Bit Limited In Terms Of Extruder And Hot End Upgrade-Ability Because Of The Geometry Of The Pressed Sheet Metal Y-Axis Design. So I Decided To Rework The Whole Y Axis Arm To Allow An E3D Titan And E3D V6 To Be Installed Without Having To Cut Or Mod The Existing Parts. The New Y-Axis Needs To Be Laser Cut From 6Mm Aluminium Sheet, I Had This Done By Hou At Https://Www.Chinalasercuttingservice.Com/ The Cutting Cost $26 Us + Shipping, I Opted For Dhl Express Which Was $35 To New Zealand. Please Note That The Included Dxf File To Be Used For Laser Cutting Is Metric (Mm), If You Are Having This Done In America You Will Need To Specify This So They Get The Scaling Right And Don'T Use Your Silly Units Instead. I Use Brass Inserts On All My Projects So Have Included The .Step Files Here If You Want To Change The Hole Details.
Statistics
Likes
5
Downloads
0