R.U.M.B.A. Case with two 40mm or one 60mm Fan
Description
Close The Bottom Of The Box With Kapton-Tape (Last Pic) Box Has 2Mm Walls Download The Clips To Mount It On A Mendemax 1.5 Or T-Max: Http://Www.Thingiverse.Com/Thing:348881 :) Have Phun Update ======= I´Ve Kicked Out The 1.6Mm Wall Version... Version With Slot To Connect Display (Needs To Be Cutted After Printing To Get The Cable In) + Lid With 60Mm Fanduct + File: "Rumba_Case_V2_Diplay_Endstop_2Mm_Walls_10Mm_Higher.Stl" + File: "Rumba_Case_V2_Closed_Bottom.Stl" Same But Bottom Closed With 0,6Mm Thickness To Get Rid Of The Kapton Tape... Excanged The 40Mm-Fan-Version With A Thicker One Wich Also Has Support For The Overhang Area. Filename: Rumba_Lid_V2_2X40Mm_Fan_Support.Stl Added Two Files Of The Lid Wich Have 3Mm Thickness And No Cutouts On The Bottom. Files: Rumba_Lid_V2_2X40Mm_Fan_Support_3Mm_No_Cutouts.Stl Rumba_Lid_V2_60Mm_Fan_3Mm_No_Cutouts.Stl Added: Mounting Plates For Ordbot And Designspark File Of The Closed Bottom Version Of The Box. Update ======= I´Ve Made A New Version, Much More Stable And With A Lid Wich Takes A 80Mm Fan And The Full Graphic Display: Http://Www.Thingiverse.Com/Thing:516447
Statistics
Likes
79
Downloads
0