Spool Holder for Geeetech Pro W
Description
Tired Of Using The Filament Spool Holder That My Geeetech Pro W (Wooden Version) Came With, And Wanting To Reclaim My Desk Space, I Created A Bracket That Fits On To The Top Of The A Frame On Either Side Of The Screen. By Pure Luck, It Slots In Perfect Against The Screen And Still Allows You To Insert/Remove The Sd Card. This Also Feeds The Filament From The Top, So Results In The Filament Not Being Pushed And Pulled Around So Much, And Not Getting Caught (Tpu Constantly Falling Off The Spool And Wrapping Itself Round The Holder. Designed To Be Screwless And Easily Removed. Print All Items At 2 Perimeter, 20% Infill, 2 Solid Top And Bottom Layers. Print Two Of Everything (Rotate The Stand And Holder 45 Degrees To Fit On The Bed), And Either Double Sided Tape, Or Super Glue The Holders To The 2 Stands To Stop Wobble. Re-Use The White Pipe The Original Holder Comes With, But I'Ve Designed Two Stoppers To Replace The Stupid Corner Pipes Geeetech Sent. I Was Going To Design A Pipe, But Decided It Would Need To Be Printed Really Thick, So Decided To Reuse. Let Me Know If You Want A Pipe Designed. There Is Also A Little Filament Guide That Clips On To The Top Of The A Frame And Will Be Held In Position By The Holder.
Statistics
Likes
3
Downloads
0