coin bottle opener / Flaschenöffner
Description
There Are 2 Different Bottle Opener: "Bottle Opener Normal": You Can Print It With 100% Infill Or You Can Do This: Print The First 3 Mm And The Last 3 Mm Without Bottom Layers And Top Layers (Bottom Layers=0). Choose 30% Honeycomb Infill. For The 4 Mm In The Middle Of The Bottle Opener You Choose 100% Infill. If You Do So, You Have A Nice Looking Honeycomb Look With A Strengh Core Inside. "Bottle Opener With Holes": This Should Be Printed Only With 100% Infill. If You Are Interested: This Structure Is The Result Of A Weight-Optimization Using Fem :) Use A Coin For The Gap. I Used A 10 Cent (Euro) Coin. It Is Not So Easy To Fit The Coin In, So It Needs Some Force. Depending On How Tight Your Printer Prints The Gap, You Can Use A Different Kind Of Coin, Of Course.
Statistics
Likes
238
Downloads
0