Ikea Lack double door enclosure
Description
I Made This Special Lack Enclosure Because I Wanted To Do More With Less Effort. Both Sides Can Be Opened To Give You More Room Around The Printer. If You Like To Tinker With Your Machine You Can Lift The Top Up. This Gives You Very Much Room To Change Rods Without Taking The Printer Out Of The Enclosure. This Case Uses Common 50Cm X 50Cm Acrylic Panels. 2X 2Mm Ones For The Back And 2X 4Mm Ones For The Doors. The Only Things Required Apart From The 4 Panels Are: - Woodscrews For The Assembly - 3Mm Drill - M3 Nuts And Screws For The Doors - If You Want To Place The Electonics Outside Of The Chamber Print The Cableguide And Saw A Hole In The Bottom - The Filament Can Be Inserted From The Bottom Or Top, Just Use The Option That Suits Your Needs - The Top Corners Of The Back Glass Panel Need To Be Cut / Filed Down To Fit The Top Hinge (Maybe Something To Fix For The Next Version)
Statistics
Likes
31
Downloads
0