Commodore Datasette Connector Backshell
Description
Backshell For A Commodore Datasette Connector. For Each Connector You Need Two (Identical) Parts And Four M2.5X12 Countersunk Screws And M2.5 Nuts. The Hole Is Designed For A 3Mm Diameter Cable. I Used Super Glue (On One Half) As Strain Relief. What You See Inside Is A Sn75176 To Convert The Line Out Of My Macbook To Ttl Levels. I Included A Schematic For The Converter In The "Thing Files".
Statistics
Likes
12
Downloads
0