Hallon 10mm Release Button Bumper Offset for AM8 or Ratrig
Description
The Standard Hallon Release Lever Will Not Reach The Frame To Reset On A Am8/Ratrig Frame. This Bumper Attaches To The Inside Of The Frame To Provide The Offset Needed To Trigger The Hallon'S Release Lever. Required Hardware: M5 X10Mm Screws Square Or T-Nuts To Secure Onto The Aluminum Extrusion. I Have Included One Master File, With A 100Mm, 150Mm, And 200Mm Length Bumper, As Well As The Files Individually For You To Choose Which You Would Like To Use. I Have Found A Total Length Of 300Mm Works To Cover The Inside Of The Frame. Some Build Ideas Were Taken From The Am8 Reinforced Build By Grkmanga. Special Thanks To Pheneeny For The Original Am8 Build, And Garagemz For The Hallon Auto Bed Leveling Sensor. ------------------------------------------------------------------------------------------------------- I Have Included A Link To The Files On Tinkercad For You To Customize As Needed. This Thing Was Made With Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/A8Qohj2Pr3B
Statistics
Likes
5
Downloads
0